Sikkerhet og sikkerhet/Dørklokker/Video dørklokker

SmartLife Video Dør Telefon

Wi-Fi | Batteri drevet | Full HD 1080p | Cloud Storage (valgfritt) / microSD (ikke inkludert) | IP54 | Med bevegelses sensor | Nattsyn | Grå

Egenskaper

Leverandør Delenummer: WIFICDP20GY
Strek nummer: 5412810330287
• Sender varsler til smarttelefonen hvis noen nærmer seg (PIR-bevegelsesdetektor) eller trykker på klokken.
• Batteridrevet - gir en 100 % trådløs løsning• Bevegelsesdeteksjon kan også deaktiveres (f.eks. hvis døren vender direkte ut mot gaten).
• Toveiskommunikasjon for å snakke med de besøkende uansett hvor du er.
• Full HD-opptak (1080p) og digital zoom på smarttelefonen for en detaljert visning.
• Opptak lagres på et MicroSD-kort på opptil 128 GB (medfølger ikke) - se igjen det som skjedde.
• Integrert i Nedis® SmartLife-appen.
• Kan utvides med trådløs dørklokke (WIFICDPC10BK - medfølger ikke), så du hører dørklokken når du er hjemme, uansett hvor telefonen er.
Med denne Nedis SmartLife-ringeklokken med kamera vet du alltid at det er noen ved døren, uansett hvor du er. Så snart den besøkende trykker på ringeklokken eller, takket være den nøyaktige PIR-bevegelsesdetektoren, til og med nærmer seg inngangsdøren, mottar du et varsel på smarttelefonen. Deretter kan du starte en videosamtale, be budet om å levere pakken hos naboen eller fortelle den selgeren at du ikke er interessert - alt uten å åpne døren.

Ettersom du kan svare fra hvor som helst i verden så lenge smarttelefonen din har Internett-forbindelse, øker dette også hjemmesikkerheten ved å få det til å se ut som om du er hjemme.
Full HD-kameraet (1080p) har en visningsvinkel på 180° og støtter nattsyn, slik at du kan se hvem som er ved døren 24 timer i døgnet.

Ingen grunn til bekymring hvis du ikke har tid til å åpne døren. Bildene lagres på et microSD-kort, slik at du kan se dem når som helst.

Denne 100 % trådløse ringeklokken med kamera er enkel å installere da den er batteridrevet og derfor ikke trenger noen tilkobling bortsett fra Wi-Fi.
Utvid denne ringeklokken med kamera med vår Nedis dørklokke (WIFICDPC10BK) for å høre lyden selv om smarttelefonen er slått av.

Emballasje

Innholdet i pakken

Ringeklokke med Kamera
Veggbrakett
USB-kabel
Installasjonsmaterialer
Hurtigveiledning

Forpaknings størrelse Gaveeske med eurolock

Bredde Høyde Lengde
162 mm 95 mm 100 mm

Logistikk størrelse

Antall/kartong Bredde Høyde Lengde Vekt
1 105 mm 120 mm 165 mm 377 g
10 335 mm 120 mm 495 mm 4100 g
20 355 mm 265 mm 510 mm 8860 g

Produktspesifikasjoner

Bredde 50 mm
Høyde 141 mm
Dybde 33 mm
Vekt 225 g
Enhetens inngangsforbindelse ® Micro USB
Input Current 1.0 A
Strømkildetype Batteri drevet
Strømkabel side B Micro USB
Strømkabel side A USB
Farge Grå
Materiale Plast
Cloud innspilling funksjonalitet Ja
Nattsyn 5 m
Kompatibel med Nedis® SmartLife
LED 1
Inngangsspenning 5 V DC
Maksimal antenneforsterkning for overføring 2 dBi
Maksimum oppløsning Full HD 1080p
Med bevegelses sensor Ja
Tilbehør Installasjonsmateriell
Trenger baterier ( inkludert) 2x 18650
App tilgjengelig for Android™
IOS
Bildebrikke 1/2.9” CMOS
Send frekvensområdet 2412 - 2472 MHz
Maksimum forbruk strøm 2 W
Batterikapasitet 5200 mAh
Maksimal overføringseffekt 13 dBm
Kapsling IP54
Betraktningsvinkel 180 °
Linse 1.4 mm
Støttet trådløs teknologi Wi-Fi
Driftstemperaturområde -20 - 50 °C
Antall produkter i pakken 1 stk.
Maks. batteri levetid 4 måned
Antall melodier 1 Melodi
Lagringstype microSD (ikke inkludert)
Cloud Storage (valgfritt)

Støtte

Vanlige spørsmål

Vi har funnet følgende spørsmål til deg på engelsk

1. Place the gong as close to the doorbell as possible during the installation.
2. Press and hold the button on the chime for 5 seconds , led on the chime flashes.
3. Shortly press chime reset button. The led will start blinking slowly.
4. Hold doorbell button until the Led on the chime stops flashing
5. Push the doorbell button to test it
6. Relocate the chime to the desired location
7. Push doorbell again to test the range

Unfortunately this battery powered doorbell does not have this option.
The wired WIFICDP10GY doorbell does allow you to change the tone and volume.

Unfortunately the manual that comes with the doorbell is incorrect.
We were too late to change it when we found out but we did add a small extra manual on how to pair the gong.

Move the gong as close to the doorbell as possible.
Give the gong's button a short press: the LED starts to blink
Now press and hold the doorbell's button until the LED on the gong stops blinking and it is paired.

It is not possible to change the tone and volume on this doorbell model.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.