Lighting/Decorative/LED Strips

SmartLife Full Colour LED Strip

Wi-Fi | Cool White / RGB / Warm White | 5 m | IP65 | 2700 - 6500 K | 405 lm | Android™ & iOS

Features

Vendor Part Number: WIFILS50CRGBW
EAN number: 5412810303106
• Easy to set up - simply connect to your Wi-Fi to set, control and schedule this LED strip
• Red, green and blue colours are available or you can select a hue from warm to cool white - to perfectly match your mood
• The strip can be shortened or extended - for endless possibilities
• Double sided adhesive (3M) already placed - for easy installation
• Works as stand-alone smart light - or pair it with other SmartLife products to create an entire smart home
Use this smart LED strip to set the mood in any room. Control it in the Nedis SmartLife application, set schedules or automations or use your favourite voice assistants to control the brightness and colour of the LED strip. It connects directly to Wi-Fi, so no separate hub is required.
As this LED strip combines both RGB as well as warm and cool white LEDs, you can not only set any preferred colour, but also use it for warm to cool white indirect lighting
Its 5 metre length can be shortened or extended with similar LED strips for endless possibilities
The double sided adhesive (3M) is already placed for easy installation on any clean and flat surface.

Packaging

Package contents

RGBW LED strip (5 m)
Wi-Fi controller
Power supply
Quick start guide

Retail package dimensions Giftbox with eurolock

Width Height Length
50 mm 190 mm 185 mm

Logistic dimensions

Packed per Width Height Length Weight
1 182 mm 50 mm 210 mm 420 g
8 195 mm 245 mm 420 mm 3720 g
32 410 mm 440 mm 510 mm 16000 g

Product specifications

Width 151 mm
Height 8 mm
Depth 5000 mm
Weight 310 g
Maximum power consumption 15 W
Input voltage 220 - 240 V AC 50/60 Hz
Maximum transmit antenna gain 2.5 dBi
Compatible with Nedis® SmartLife
Power adapter cable length 1.50 m
Maximum transmit power 16 dBm
Colour rendering index (Ra) 80
Light colour Warm White
Cool White
RGB
App available for Android™
IOS
IP rating IP44
Power plug Euro (CEE 7/16)
Dimmable Yes
Rated life time of lamp 20000 h
Supported wireless technology Wi-Fi
Cuttable Yes
Energy consumption per 1000 hours 15 kWh
Mount Surface Mounted
Material Silicone
Extendable light strip Yes
Transmit frequency range 2412 - 2484 MHz
Number of Products in Package 1 pcs
Device power input connection(s) DC
Colour temperature 2700 - 6500 K
Energy class F
Rated luminous flux 960 lm
Colour Multi Colour
Cord length 5.00 m
LED module SMD 5050
Number of LEDs per meter 90 pcs

Support

Frequently asked questions

We have found the following questions for you in English

No, the LED's are not individually addressable.

Please try the AP mode.

Make sure that you use a 2.4Ghz wifi network.

Reset the controller so the LED strip blinks slow. (press and hold the button on the controller)

If it blinks fast, reset it again and it will blink slowly



In the app:

+ > [your device] > tap on EZ mode and select AP mode > confirm it was reset > fill in the info of your wifi network > follow the steps in the app.



Hold your phone very close to the plug during the installation

This method uses a direct connection to the device to send the info of your wifi to it.

Holding it close optimises this connection

Ensure that you only take off the plastic protection and not the entire adhesive strip.
If you remove the whole strip, you will not be able to stick it to anything.

Yes, you can purchase another set and plug the second strip in the first one.
If you extend it to 10m (5m extra) then you might see some loss in brightness at the end of the second strip.
We recommend you install multiple complete sets and group them in the app.
Now you can control all of the strips as if they are a single strip without any loss in brightness.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.